STAS windsor wooden rail set

STAS windsor wooden rail set

In stock
SKU
STAS windsor wooden rail set

In addition to aluminum rails, STAS also offers wooden rails, suitable for any interior! The STAS windsor is elegant and warm. Our STAS windsor wooden rail is easy to use and has a classic profile for which matching hooks are available. 

The advantages of our high quality Ayous wood:
- FSC and PEFC certified: timber from sustainably managed forests
- Won’t warp or splinter because of temperature and humidity changes
- Perfectly suitable to repaint because of its smooth texture

Features STAS windsor: 
Dimensions: 18 x 45 mm
Length: +/- 120 cm (47 inch)
Material: Ayous wood, FSC and PEFC certified
Ayous wood not deform nor splinter, perfectly suitable to repaint
Installation: wall mountable, not adjoining to ceiling
Can be mounted screwed, nailed and glued*.
Weight capacity: 20 kg/m
Warranty: 5 years

Grouped product items
Product Name Qty
STAS windsor STAS windsor
$13.05
STAS picture rail molding hook + perlon cord with loop 59 inch (150 cm) + STAS zipper STAS picture rail molding hook + perlon cord with loop 59 inch (150 cm) + STAS zipper
As low as $7.52
Total selected:
Buy straight from the manufacturer Patented Dutch design 5 years warranty, multirail 2 years
 Shipping within 48 hours
Since 1995, more than 8.2 million pieces were hung using a STAS system!

Our wooden rails are made out of Ayous wood and are FSC and PEFC certified. Ayous wood differs from other, cheaper wood since it does not deform nor splinter, and is perfectly suitable to repaint because of its smooth texture. Perfect wood for your picture hanging system! Can be mounted with screws, nails and glue*.

Experience the pleasant warmth of wood in your interior!

* The bearing capacity of a glued rails is highly dependent on the surface, so care must be taken here. More information on how to best glue our wooden rails can be found at the bottom of this page.

Features STAS windsor:
Dimensions: 18 x 45 mm
Length: +/- 120 cm (47 inch)
Material: Ayous wood
Installation: wall mountable, not adjoining to ceiling
Weight capacity: 20 kg/m
Warranty: 5 years

We are using timber from sustainably managed forests.where trees are replanted as they are felled.
STAS maintains strict quality control regarding the wood – the rails are perfectly straight and very well dried.

The high quality Ayous wood differs from other, cheaper wood types:
It can handle temperature and humidity changes very well – so it won’t warp or splinter as easily as other, cheaper wood type rails such as pine.
Perfectly suitable to repaint because of its smooth texture.

STAS windsor has its own collection of hooks, which can be combined with the existing hooks and cords from STAS:

STAS windsor:
HW10200 white
HW30200 alu
HW60200 gold

The following hooks and cords can be used in combination with this system:
STAS smartspring on STAS perlon cord with loop (can be loaded up to max. 4 kg)
STAS zipper on STAS perlon cord with loop (can be loaded up to max. 15 kg)
STAS zipper on STAS steel cable with loop (can be loaded up to max. 20 kg)

Download:

Installation manual | Productinfo

Montage videos : STAS windsor mounting with screws and glue

STAS wooden rail

5-Step Plan for glueing the STAS windsor

Step 1: Assess the surface

When glueing the STAS wooden rails it’s very important that the surface is well fixed and firm. This goes especially for wall paper. The wall paper must have been applied tightly and evenly to allow the STAS wooden rails to adhere as well as possible.

Step 2: Pick the right glue.

We recommend a glue that is especially designed to offer a very good adhesion on wooden surfaces. We advise you to go see your local DIY store for further recommendations.

Step 3: Pretreatment

Make sure that the surface and the STAS wooden rails are clean, dry, dust- and grease free before you start glueing.

Step 4: Glueing

The glue can best be applied in strokes (so don’t cover the whole rails in glue). Once the glue is applied you can place the STAS wooden rails on its surface (make sure it’s level!). The STAS wooden rails can at this point still be adjusted. When the rails are in the right place you can exert pressure so that the STAS wooden rails is well attached to the surface. Then allow the glue to dry for 24 hours.

Step 5: Hang your wall decoration

Hang your favorite wall decoration using the STAS hooks and cords and admire the result! J

Write Your Own Review
You're reviewing:STAS windsor wooden rail set
Your Rating

How much will it cost?

USA:
For orders under $149, shipping within the USA

  • Orders containing rail: $9.99 -
  • Orders containing hooks, cords or other small items: $ 4.99
  • For orders over $149, shipping within the USA is free.
  • Express shipping is available upon request (contact us at info@picturehangingsystems.com) and will be billed at the applicable published UPS rate for an originating zip of 01588.


Canada:

For orders under C$345, shipping within Canada

  • Flat rate of 28 CAD (=$19,99 USD) •
  • For orders over $345 CAD, shipping within Canada is free.
For orders shipped to Canada, please order from our Canadian store

When will my order ship and when will it arrive?

Orders generally ship within 48 hours. For time sensitive orders, contact us at info@picturehangingsystems.com. Carrier method is at our discretion.

That being said, generally we ship as follows: Track/Hanging Rods & Accessories/Small Components- USPS (estimated arrival is 1-5 days after ship date)

Other General Shipping Information

  • All orders are shipped from our facility located at 85 Court Street, Whitinsville, MA 01588 USA.
  • Shipment Tracking information is automatically delivered to the email address provided with your customer account.
  • Shipping outside the United States is available. Contact us for a shipping quote.